Start here
Embedded System Architecture: Hardware and Software Components
How embedded systems are built: the processor, memory, clock, power and I/O hardware, plus the software layers and architectures that run on top of them.
Foundations
Processor cores, memory, buses, sensors and communication protocols such as UART, SPI and I2C.
Start here
How embedded systems are built: the processor, memory, clock, power and I/O hardware, plus the software layers and architectures that run on top of them.
How Arm's Cortex-M, Cortex-A and Cortex-R profiles differ in memory management, real-time behavior and software, with example chips and advice on choosing.
How UART, SPI, I2C, CAN and other embedded protocols work, how synchronous and asynchronous links differ, how bus arbitration works, and how to choose.
What a development board is, the main types from Arduino and STM32 Nucleo to ESP32 and Raspberry Pi, and how to pick one for your project or learning goals.
An embedded system is the whole dedicated device: hardware plus code. Embedded software is the code inside it. See how the two differ and depend on each other.
The difference between Harvard and von Neumann architecture in microcontrollers, why most chips use modified Harvard, and what it means for AVR, PIC and ARM code.
How flash, SRAM and EEPROM differ in a microcontroller, what each stores, how code and variables are laid out, and how to avoid wearing out non-volatile memory.
How embedded systems connect to the physical world: reading sensors through ADCs and buses, driving motors and relays safely, and the circuits in between.
The seven network protocols most often listed (IP, TCP, UDP, HTTP, DNS, DHCP and FTP), what each does, how they map to OSI layers and how IoT devices use them.
Asynchronous means not happening at the same time or not tied to a shared clock. Here's what it means in everyday use, serial communication, hardware and code.
A bus is a shared set of signal lines that moves data between a processor, memory and peripherals. See how address, data and control buses, AHB/APB and I2C fit in.
What a watchdog timer is, how it resets a hung microcontroller, the main types, AVR and STM32 code examples, and where to kick it so it actually catches faults.
The sensors most used in embedded systems, from temperature, IMU and distance to gas and current, with example parts, typical interfaces and tips for choosing one.
Related topics