There’s no shortage of embedded systems material. The problem is choosing. This list is organized by learning stage, so you can pick one or two resources for the stage you’re at instead of collecting dozens you’ll never finish.
If you haven’t mapped out the stages yet, our embedded systems engineer roadmap lays them out in order. The resources below line up with that path.
A short starter stack
If you want a place to start right now, this combination covers most of what a beginner needs:
- A solid C book (see the C section below)
- Making Embedded Systems by Elecia White for how professional firmware is designed
- One structured course with a real board, such as the University of Texas “Embedded Systems – Shape the World” course on edX or Miro Samek’s free “Modern Embedded Systems Programming” video series
- The reference manual and datasheet for whatever microcontroller you’re using
- One community to ask questions in, such as r/embedded or the EEVblog forum
Add the specialized books later, as projects call for them.
Books
C programming foundations
- The C Programming Language by Brian Kernighan and Dennis Ritchie. Short and dense, often called K&R. It’s a classic, but it predates modern C standards, so pair it with something newer.
- C Programming: A Modern Approach by K. N. King. A thorough, beginner-friendly textbook that covers C99. Good if K&R feels too terse.
- Bare Metal C by Stephen Oualline. Teaches C specifically in the context of microcontrollers: startup code, linker scripts, and memory, not just syntax.
- Expert C Programming: Deep C Secrets by Peter van der Linden. Older and informal, but useful for understanding declarations, arrays vs pointers, and other parts of C that trip people up.
Embedded fundamentals and firmware design
- Making Embedded Systems by Elecia White (O’Reilly, now in a second edition). Probably the most commonly recommended introduction to how embedded software is designed in practice: architecture, interrupts, power, debugging, and working with hardware teams.
- Embedded Software Design by Jacob Beningo. Covers modern practices such as architecture, modeling, and DevOps-style workflows for firmware.
- Reusable Firmware Development by Jacob Beningo. Focuses on hardware abstraction layers and writing drivers you can carry between projects.
- Programming Embedded Systems by Michael Barr and Anthony Massa. An older but clear introduction to the embedded build process, memory, and peripherals.
ARM Cortex-M and microcontroller-specific
- Jonathan Valvano’s textbooks, including Embedded Systems: Introduction to ARM Cortex-M Microcontrollers and Real-Time Interfacing to ARM Cortex-M Microcontrollers. These are university-style texts that build from fundamentals to interfacing.
- The Definitive Guide to ARM Cortex-M3 and Cortex-M4 Processors by Joseph Yiu. A detailed reference for the architecture: exceptions, the NVIC, memory map, and low-power features. Yiu has written companion guides for other Cortex-M cores.
- Mastering STM32 by Carmine Noviello. A practical guide if you’re working with STM32 parts and ST’s tools.
- Make: AVR Programming by Elliot Williams. Register-level programming on 8-bit AVR chips, the same family used in the Arduino Uno. A good bridge from Arduino to bare-metal code.
RTOS and concurrency
- Mastering the FreeRTOS Real Time Kernel. A free guide from the FreeRTOS project. It’s a clear introduction to tasks, queues, semaphores, and interrupts in an RTOS.
- Hands-On RTOS with Microcontrollers by Brian Amos. Walks through FreeRTOS on an STM32 board, with attention to debugging and design.
- Real-Time Concepts for Embedded Systems by Qing Li and Caroline Yao. An older, vendor-neutral explanation of scheduling, synchronization, and RTOS objects.
Testing and code quality
- Test Driven Development for Embedded C by James Grenning. The standard book on unit testing C code off-target. It changes how many readers structure their firmware.
- Better Embedded System Software by Philip Koopman. Short chapters on the practices that separate reliable embedded software from fragile code, from requirements to watchdogs to code reviews.
- The Embedded C Coding Standard from Barr Group. A short, practical coding standard, available as a free download from Barr Group.
Embedded Linux
- Mastering Embedded Linux Programming by Chris Simmonds (later editions co-written with Frank Vasquez). Covers toolchains, bootloaders, kernels, root filesystems, Buildroot, and Yocto.
- Linux Device Drivers, 3rd Edition by Corbet, Rubini, and Kroah-Hartman. Freely available online and still useful for concepts, but it targets the 2.6 kernel and many APIs have changed. Check details against current kernel documentation.
Electronics for firmware engineers
- Practical Electronics for Inventors by Paul Scherz and Simon Monk. A friendly reference for components and circuits.
- The Art of Electronics by Paul Horowitz and Winfield Hill. The deep reference. Better as something you look things up in than a book you read cover to cover.
Safety-critical and reliability
- Embedded Software Development for Safety-Critical Systems by Chris Hobbs. An introduction to the standards, techniques, and mindset used in medical, automotive, and industrial software.
Computer architecture
- Digital Design and Computer Architecture by David Harris and Sarah Harris. Goes from logic gates to a working processor. Editions are available for ARM and RISC-V.
Free courses and video series
- “Embedded Systems – Shape the World” (University of Texas at Austin, on edX). Taught by Jonathan Valvano and Ramesh Yerraballi using a low-cost TI LaunchPad board. Popular with beginners because it’s hands-on.
- “Modern Embedded Systems Programming” by Miro Samek (Quantum Leaps, YouTube). A long video series that starts with the basics on a Cortex-M board and works up to RTOS concepts, state machines, and event-driven design. It shows what the compiler and CPU are actually doing.
- “Introduction to RTOS” by Shawn Hymel (DigiKey, YouTube). A short, practical FreeRTOS series using an ESP32.
- University of Colorado Boulder embedded courses on Coursera. A specialization covering embedded software and development environments.
- Phil’s Lab (YouTube). Hardware and PCB design with a focus on embedded boards. Useful if you want to understand the circuits your firmware runs on.
Paid platforms such as Udemy also host many embedded courses. Quality varies a lot, so check reviews and sample lectures before buying.
Websites, blogs, and newsletters
- Interrupt (by Memfault). Long, technical articles on debugging, build systems, fault handling, and firmware tooling. One of the most useful free resources for working engineers.
- Embedded Artistry. Articles, a curated reading list, and a large glossary of embedded topics.
- The Embedded Muse (Jack Ganssle). A long-running free newsletter on embedded engineering practice, with an archive of past issues on his site.
- Embedded.com and EmbeddedRelated.com. Industry articles and community blogs on a wide range of topics.
- Jacob Beningo’s blog and newsletter. Practical posts on firmware architecture, RTOSes, and tools.
- Adafruit Learn and SparkFun tutorials. Beginner-friendly project guides, wiring diagrams, and explanations of common sensors and modules.
- Hackaday. Not a tutorial site, but a steady source of project ideas and write-ups that show how other people solved real problems.
- The Embedded Rust Book and the Rust Embedded working group docs. The free starting point if you want to try Rust on microcontrollers.
Podcasts
- Embedded.fm, hosted by Elecia White and Christopher White. Interviews with people across the embedded world, from firmware engineers to hardware designers and educators.
- The Amp Hour, which focuses more on electronics and hardware design but often touches on embedded topics.
Communities and forums
- r/embedded on Reddit. Active, with frequent career and learning threads. Search before posting, because common questions have been answered many times.
- EEVblog forum. Strong on electronics and test equipment.
- Vendor communities such as the ST Community, NXP Community, and Espressif forums, for chip-specific problems.
- Zephyr and FreeRTOS forums or chat channels, if you use either RTOS.
- Local maker spaces and meetups. Being able to show someone your board in person is hard to beat.
Primary documentation: the resource everyone underuses
Books and courses explain concepts, but professional embedded work happens in primary documents:
- Datasheets for pin assignments, electrical limits, and package details
- Reference manuals for peripheral registers and how each peripheral behaves
- Programming manuals for the CPU core (for Cortex-M, from Arm)
- Errata sheets, which list known silicon bugs and workarounds
- Application notes, where vendors explain how to use a peripheral well
Learning to find what you need in a 1,000-page reference manual is a skill in itself, and interviewers notice it. For example, a hiring manager may be impressed by a portfolio project that cites the specific reference manual section behind a driver. Our guide on how to get an embedded systems job with no experience covers how to present work like that.
How to choose and avoid tutorial overload
- Match the resource to your stage. A beginner doesn’t need Yocto or safety standards yet.
- Pick one main resource per topic. Finish it, then supplement.
- Learn with a board in hand. Reading about I2C is much less useful than watching it fail on a logic analyzer and working out why.
- Prefer resources that show the hardware level. Tutorials that only call library functions teach you a library, not embedded systems.
- Check publication dates for tooling. Concepts like interrupts and memory don’t age much, but IDEs, SDKs, and kernel APIs change.
If you’re deciding which language to invest in first, see what language is best for embedded systems. When you’re getting ready to apply, practice with our list of common embedded systems interview questions.