The short answer
Embedded systems are the small, dedicated computers built into everyday products. They’re found in home appliances, cars, phones and wearables, medical devices, factory machines, power and water infrastructure, networking gear, and aircraft. Most people use dozens of them every day without noticing.
Ten familiar examples:
- Washing machines and dishwashers
- Microwave ovens
- Smart thermostats
- Car engine control units and anti-lock brakes
- Fitness trackers and smartwatches
- Wireless earbuds
- Wi-Fi routers and cable modems
- Card payment terminals
- Blood glucose meters and infusion pumps
- Industrial programmable logic controllers (PLCs)
Each one is built around a microcontroller or small processor running firmware written for that one job. Below, we group applications by setting and explain what the embedded system in each one actually does. For a definition first, see what is meant by a real-time embedded system.
At home
| Device | What the embedded system does |
|---|---|
| Washing machine | Runs wash programs, controls the motor, valves, heater, and pump, reads water level and temperature, balances the drum |
| Microwave oven | Reads the keypad, runs the timer and power levels, drives the display, checks the door interlock |
| Smart thermostat | Reads temperature (and often humidity), runs the heating or cooling schedule, connects over Wi-Fi |
| Refrigerator | Controls the compressor and defrost cycle, monitors door state and temperatures |
| Smart speaker | Captures audio from microphones, detects the wake word locally, streams audio, drives the speaker |
| Robot vacuum | Reads bump, cliff, and distance sensors, controls the wheel and brush motors, plans routes |
| Smoke and CO alarm | Samples the sensor, decides when to alarm, monitors the battery |
| TV remote, garage door opener | Scans buttons and sends coded radio or infrared signals, then sleeps to save battery |
Home devices show a wide range. A remote control may use a tiny microcontroller costing very little. A smart speaker needs a more capable processor, audio processing, and networking.
Personal and wearable devices
- Fitness trackers and smartwatches sample motion and heart-rate sensors, count steps, manage Bluetooth links, and run for days on a small battery.
- Wireless earbuds handle Bluetooth audio, noise cancellation, touch controls, and charging, all inside a very small package.
- Smartphones are an interesting case. The phone as a whole is a general-purpose computer, since you install apps on it. It also contains many embedded processors, though, such as those in the cellular modem, Wi-Fi and Bluetooth chips, camera modules, touch controller, and power management.
- Digital cameras use embedded processors for autofocus, exposure, image processing, and storage.
- E-readers, game controllers, and electric toothbrushes are also embedded systems.
Cars and transport
A modern car contains dozens of electronic control units (ECUs), and premium models contain more. They communicate over in-vehicle networks such as CAN, LIN, and automotive Ethernet.
| System | What it does |
|---|---|
| Engine control unit | Controls fuel injection and ignition timing based on sensor readings, many times per engine revolution |
| Anti-lock brakes (ABS) and stability control | Detects wheel lock or skids and modulates brake pressure on individual wheels |
| Airbag control unit | Monitors crash sensors and decides whether and when to fire the airbags |
| Battery management system (EVs) | Monitors cell voltages and temperatures, balances cells, and protects the pack |
| Driver-assistance systems | Process camera and radar data for features like adaptive cruise control and lane keeping |
| Body and comfort systems | Windows, locks, seats, climate control, lighting |
| Tire pressure monitoring | Sensors in the wheels report pressure by radio to a receiver |
Outside cars, embedded systems run railway signaling and train control, e-bike and scooter motor controllers, ticket gates, and ship navigation equipment.
Medical devices
Medical devices are among the most carefully engineered embedded systems. Their software is usually developed under medical device regulations and standards such as IEC 62304.
- Pacemakers and implantable defibrillators sense the heart’s electrical activity and deliver pulses when needed, running for years on a battery.
- Insulin pumps and infusion pumps deliver controlled doses of medication and monitor for blockages and other faults.
- Blood glucose meters and continuous glucose monitors measure and report glucose levels.
- Patient monitors display heart rate, blood oxygen, blood pressure, and other readings, and raise alarms.
- Ventilators control airflow and pressure for patients who need help breathing.
- Imaging equipment such as ultrasound and MRI machines contains many embedded controllers alongside larger computers.
Factories and industrial automation
- Programmable logic controllers (PLCs) run machine and process logic in factories, water plants, and packaging lines, often on a fixed scan cycle.
- Motor drives (variable-frequency drives and servo drives) control the speed, torque, and position of electric motors.
- Industrial robots coordinate several motor axes along precise paths.
- Sensors and transmitters measure pressure, flow, level, and temperature, and report over industrial networks.
- CNC machines and 3D printers turn toolpaths into coordinated stepper or servo motion.
- Vision inspection systems check parts on a moving line and reject faulty ones.
Energy and utilities
- Smart electricity, gas, and water meters measure consumption and report it over radio or power-line networks.
- Solar inverters convert DC from panels to AC, track the panels’ maximum power point, and must disconnect safely if the grid fails.
- Home and grid battery systems use battery management controllers to monitor and protect cells.
- Protection relays in substations detect faults on power lines and trip breakers.
- EV chargers manage charging power and communicate with the vehicle and the network.
Networking, offices, and retail
- Routers, switches, and modems forward network traffic and run the protocols that keep connections up.
- Printers and copiers control paper handling, print heads or lasers, and scanning.
- Card payment terminals read cards, handle encryption, and talk to the payment network.
- ATMs and vending machines run the user interface, dispensing mechanisms, and security features.
- Barcode scanners and point-of-sale hardware decode images and connect to store systems.
Public infrastructure
- Traffic lights run timing plans and respond to vehicle detectors and pedestrian buttons.
- Elevators control motors, doors, and safety circuits, and schedule which floors to visit.
- Speed cameras and toll systems detect vehicles, capture images, and log events.
- Environmental monitoring stations sample air quality, noise, or weather data and report it.
Aerospace and defense
- Flight control computers turn pilot inputs and sensor data into control-surface commands.
- Engine controllers (FADEC) manage jet engine fuel flow and limits.
- Satellites contain embedded computers for attitude control, power, communications, and payloads.
- Drones use flight controllers that read gyroscopes and accelerometers and adjust motor speeds many times per second.
Airborne software is typically developed under strict guidance such as DO-178C, which affects how it’s designed, tested, and documented.
Inside one device: a washing machine
A washing machine is a good example of how the parts fit together:
- Inputs: a control-panel keypad or knob, a water-level (pressure) sensor, a temperature sensor, a door-lock switch, and motor speed feedback.
- Controller: a microcontroller running the wash program as a state machine: fill, heat, wash, drain, rinse, spin.
- Outputs: water inlet valves, the heating element, the drain pump, the door lock, the display, and the motor drive.
- Timing: most of the program is relaxed, since it doesn’t matter whether the fill valve closes a few hundred milliseconds early or late. The motor control is different. In machines with electronically controlled motors, the drive adjusts motor current continuously to hold speed and handle an unbalanced load during spin, and that loop has to keep up.
That mix of relaxed and time-critical work inside one product is typical. The urgent parts get priority, and the rest fits around them.
Which applications are real-time?
Almost every embedded application has some timing requirement, but the consequences of being late vary widely:
| Strictness | Typical examples |
|---|---|
| A miss counts as a failure (hard) | Airbag and brake control, motor current loops, pacemaker pacing, flight control, power-line protection relays |
| Late results are discarded (firm) | Sensor samples outside their window, frames on some industrial networks, vision inspection of a single part |
| Late results just lower quality (soft) | Audio in earbuds, display updates, smart-home app responses, logging |
These are illustrations, not fixed labels. Classification depends on the specific function and what happens when it’s late. Our article on hard vs soft real-time systems explains how to classify a requirement, and real-time system applications and examples goes deeper into the time-critical applications.
What these applications have in common
Despite the variety, embedded applications share a pattern:
- A dedicated job. Each controller does one thing, which keeps hardware cheap and behavior predictable.
- Sense, decide, act. Inputs come from sensors and controls, firmware decides, and outputs drive the physical world.
- Tight budgets. Cost, power, size, and memory are limited, often severely.
- Unattended reliability. Devices are expected to run for years, recover from faults on their own, and fail safely.
- More connectivity. A growing share connect to phones, networks, or the cloud, which adds features but also security and update requirements.
Many of the more complex ones run a real-time operating system to juggle several activities. For an introduction to that, see getting started with FreeRTOS.
Frequently asked questions
Is a smartphone an embedded system?
Not as a whole. A smartphone runs a general-purpose operating system and apps you choose, so it’s usually classed as a general-purpose computer. It does contain many embedded systems inside it, such as the modem, the wireless chips, and the power and sensor controllers.
What is the most common embedded system?
There’s no reliable single answer, but very simple devices built on small microcontrollers, such as remote controls, appliance controllers, chargers, and sensors, are made in enormous numbers. Most embedded systems are small, cheap, and unglamorous.
Is a laptop an embedded system?
No, but like a phone it contains several. The keyboard controller, battery management, SSD controller, and Wi-Fi module each run their own firmware.
Are all embedded systems connected to the internet?
No. Many work entirely on their own, like a basic microwave or a car’s airbag controller. Connected embedded devices are usually described as IoT (Internet of Things) devices.