Embedded Basics

Is a Raspberry Pi an Embedded System?

Is a Raspberry Pi an embedded system? It depends on how it's used. Learn how it compares with microcontrollers, its limits, and when it suits embedded projects.

On this page
  1. The short answer
  2. What is a Raspberry Pi?
  3. What counts as an embedded system?
  4. Why a Raspberry Pi can be an embedded system
  5. Why it’s often called a general-purpose computer instead
  6. Raspberry Pi vs microcontroller boards
  7. Limitations of a Raspberry Pi in embedded projects
  8. When to use a Raspberry Pi in an embedded project
  9. Frequently asked questions

The short answer

It depends on how it’s used. A Raspberry Pi is a general-purpose single-board computer. If you plug in a keyboard, mouse and monitor and use it as a desktop, it’s working as a general-purpose computer. If you build it into a device that does one dedicated job, it’s working as an embedded system. A camera trap, a digital sign, a kiosk or a factory monitoring box are all examples.

So the Raspberry Pi is not a microcontroller, and it isn’t embedded by nature. It’s a computer that is very often used as the brain of embedded systems. Raspberry Pi even makes a version, the Compute Module, designed specifically to be built into products.

What is a Raspberry Pi?

The full-size Raspberry Pi boards, such as the Raspberry Pi 4 and Raspberry Pi 5, are complete small computers on a single circuit board. Each is built around a Broadcom system-on-chip (SoC) with multiple Arm Cortex-A processor cores and a graphics processor. Typical features include:

  • Gigabytes of RAM
  • Storage on a microSD card, with USB or other storage options on many models
  • USB, Ethernet, Wi-Fi and Bluetooth on most current models
  • HDMI video output
  • A 40-pin header with general-purpose input/output (GPIO) pins, plus serial, I2C and SPI interfaces

Most people run Raspberry Pi OS, a Linux distribution based on Debian, though other Linux versions and operating systems are available. That means it can run a desktop, a web browser, Python, databases, web servers and most other software you’d run on a Linux PC.

What counts as an embedded system?

An embedded system is a computer built into a larger device to perform a specific function. Its main traits are:

  • It does a dedicated job rather than running whatever software the user chooses.
  • It’s part of a larger product, often with no keyboard or screen of its own.
  • It usually works with sensors and actuators to monitor or control something physical.
  • It’s often limited in cost, size and power, and may have to respond within strict time limits.

By contrast, a general-purpose system like a laptop is designed to run many different programs chosen by its user. Our comparison of embedded systems vs general-purpose computers goes into the distinction in more depth.

The key point is that “embedded” describes how a computer is used, not just what hardware it has. Many embedded systems use microcontrollers. Many others, such as smart TVs, routers and car infotainment units, use application processors running Linux or similar operating systems, much like a Raspberry Pi.

Why a Raspberry Pi can be an embedded system

Once a Pi is installed inside a device and set up to do one job, usually running headless (with no monitor or keyboard) and starting its program automatically at boot, it fits the definition of an embedded system well. Common examples include:

  • Digital signage and information displays
  • Kiosks and point-of-sale terminals
  • Industrial monitoring, data logging and gateway devices
  • Home automation hubs
  • Network appliances, such as ad blockers or VPN gateways
  • Camera systems, wildlife cameras and time-lapse rigs
  • Retro gaming consoles and media players
  • Robots, where the Pi handles vision and high-level decisions

In these roles the user interacts with the device, not with a general-purpose computer. That’s the same as with any embedded product.

The Compute Module: a Pi made for embedding

The Raspberry Pi Compute Module range packs the core of a Raspberry Pi (the processor, RAM, and on many versions onboard eMMC flash storage) onto a small module. Instead of the usual full-size connectors, it plugs into a custom carrier board that a product designer makes. This lets companies build a Pi into their own hardware with only the connectors and features the product needs. Compute Modules are used in a range of commercial and industrial products.

Why it’s often called a general-purpose computer instead

People who say a Raspberry Pi is not an embedded system usually make these points:

  • It runs a full general-purpose operating system and can run almost any Linux software.
  • It’s sold and marketed partly as a low-cost desktop computer and for education.
  • It’s built around an application processor, not a microcontroller, and depends on external RAM and storage.
  • It doesn’t offer the predictable real-time timing that many embedded control tasks need, at least not under a standard Linux setup.

These points are true of the board itself. They don’t stop it from being used as an embedded system, in the same way a PC motherboard can be built into a machine and run one dedicated program.

Raspberry Pi vs microcontroller boards

The comparison most people have in mind is the Raspberry Pi vs an Arduino. The difference comes down to microcontrollers vs microprocessors:

Feature Raspberry Pi (full-size) Microcontroller board (e.g., Arduino Uno)
Processor type Application processor (Arm Cortex-A SoC) Microcontroller
Operating system Linux (usually Raspberry Pi OS) None (bare metal) or a small RTOS
Memory Gigabytes of RAM Kilobytes of RAM
Storage microSD card, eMMC or USB/SSD On-chip flash
Start-up Seconds, while the OS boots Almost instant
Real-time timing Not guaranteed under standard Linux Predictable and precise
Power draw Watts Milliwatts, with deep sleep modes possible on many chips
Analog inputs None built in Built-in analog-to-digital converter
Strengths Networking, cameras, displays, files, high-level languages Direct hardware control, low power, low cost, simplicity

For more on the microcontroller side, see our article on whether Arduino is an embedded system.

What about the Raspberry Pi Pico?

The Raspberry Pi Pico is a different kind of product. Despite the name, it’s a microcontroller board, built around Raspberry Pi’s own RP2040 chip or the newer RP2350. It doesn’t run Linux. You program it in C/C++ with the official SDK, or in MicroPython or CircuitPython, and your code runs directly on the chip. A Pico is an embedded system in the classic sense, much like an Arduino.

Limitations of a Raspberry Pi in embedded projects

A Pi works well in many embedded roles, but it has some limits you should plan around.

Boot time and shutdown

A Pi takes a while to boot Linux, typically several seconds or more depending on the setup, while a microcontroller starts almost instantly. Linux also prefers a clean shutdown. Cutting power without shutting down can cause problems, as described below.

Real-time timing

Standard Linux shares the processor among many tasks, so it can’t guarantee that your code responds within a precise number of microseconds. That’s fine for logging data or serving a web page, but it can be a problem for tight motor control or timing-critical protocols. Real-time Linux options can reduce latency. A common approach is to pair the Pi with a microcontroller that handles the time-critical work.

SD card reliability

microSD cards can wear out with frequent writes. Losing power during a write can corrupt the file system. For long-running embedded use, common measures include:

  • Using high-quality or industrial-grade cards
  • Reducing writes, for example by moving logs to RAM
  • Making the file system read-only
  • Using a Compute Module with eMMC storage, or booting from USB or SSD where the model supports it

Power consumption

A full-size Pi draws several watts, and more under load or with peripherals attached. That’s tiny for a mains-powered device but a lot for a battery-powered one. Microcontrollers can sleep at microamps and run for months on a small battery, which a Pi can’t.

Hardware interfaces

The Pi’s GPIO pins work at 3.3 V and are not 5 V tolerant, so connecting 5 V signals directly can damage the board. Full-size Pis also have no built-in analog inputs, so reading analog sensors needs an external analog-to-digital converter. Each pin can supply only a small current, so motors, relays and other loads need driver circuits.

When to use a Raspberry Pi in an embedded project

A Raspberry Pi is often a good fit when the device needs:

  • Networking, a web interface or cloud connectivity
  • A camera, video, audio or a graphical display
  • Lots of memory, file storage or a database
  • Existing Linux software or high-level languages like Python
  • Fast development of a prototype or a low-volume product

A microcontroller is usually the better choice when the device needs:

  • Battery power and very low energy use
  • Instant start-up and tolerance of sudden power loss
  • Precise, predictable timing
  • The lowest possible cost and size in high volume

Many projects use both. The Pi handles the user interface, networking and data, and a microcontroller handles sensors, motors and anything time-critical. The two talk over a serial, I2C or USB link.

Frequently asked questions

Is a Raspberry Pi a microcontroller?

No. Full-size Raspberry Pi boards use an application processor and run a full operating system. The Raspberry Pi Pico is the exception: it’s a microcontroller board.

Is the Raspberry Pi used in commercial products?

Yes. Raspberry Pi boards and especially Compute Modules are used in commercial and industrial products, including signage, industrial controllers, gateways and kiosks. Raspberry Pi Ltd has said that industrial and embedded customers account for a substantial share of its sales.

Is a Raspberry Pi good for learning embedded systems?

It’s good for learning embedded Linux, networking and interfacing with sensors from high-level code. For learning low-level microcontroller skills, such as registers, interrupts, timers and bare-metal firmware, a microcontroller board like a Pico or an Arduino teaches more about how the hardware actually works. Many people use both.

Can a Raspberry Pi and an Arduino work together?

Yes, and it’s a common setup. The Arduino or other microcontroller handles real-time input and output, and it sends data to the Pi or takes commands from it over USB serial, UART or I2C. Because the Pi uses 3.3 V logic, take care when connecting it to 5 V boards such as the Arduino Uno. A level shifter is often needed.

The complete guide to embedded basics

What Is an Embedded System? Definition, Features and Examples
Read the guide

Keep exploring

Guides from other topics

All topics →