Embedded Basics

What are some real-life examples of embedded systems?

Everyday examples of embedded systems, from microwaves and thermostats to car brakes and ATMs, with what each one does and how to spot them yourself.

On this page
  1. The short answer
  2. A day of embedded systems
  3. What makes each of these an embedded system
  4. How to spot an embedded system
  5. Frequently asked questions

The short answer

Real-life examples of embedded systems include:

  • Microwave ovens that time cooking and control the power level
  • Washing machines that run wash cycles, control the motor and monitor water level
  • Digital thermostats that read the room temperature and switch heating or cooling on and off
  • TV remote controls that send coded signals when you press a button
  • Fitness trackers and smartwatches that count steps and measure heart rate
  • Car anti-lock braking systems (ABS) that stop the wheels from locking under hard braking
  • Airbag controllers that decide in milliseconds whether to deploy
  • ATMs that handle your card, PIN and cash
  • Wi-Fi routers that direct internet traffic around your home
  • Traffic light controllers that sequence the signals at a junction
  • Pacemakers that monitor the heart and deliver pulses when needed

Each of these contains a small dedicated computer, usually a microcontroller running firmware, built into the product to do one job. That’s what makes it an embedded system.

A day of embedded systems

The easiest way to see how common embedded systems are is to follow an ordinary day.

In the kitchen

Your alarm clock or bedside radio wakes you. If it has a digital display, a microcontroller is keeping time and checking the alarm setting. In the kitchen, the coffee maker with a programmable timer, the microwave with its keypad and countdown, and the toaster oven with a digital temperature setting all contain embedded controllers. The refrigerator may have one too, reading temperature sensors and controlling the compressor and defrost cycle. A dishwasher runs a program that fills, heats, sprays and drains in sequence, checking sensors as it goes.

Around the house

The thermostat on the wall measures temperature and decides when to call for heat. The washing machine and dryer run cycles, monitor the drum and detect unbalanced loads. A smart speaker listens for its wake word. The TV remote sleeps until you press a button, then sends a code to the TV, which has its own embedded processor. Your Wi-Fi router routes traffic to every connected device. Even a smoke alarm with a test button and low-battery chirp may use a small embedded chip.

On your body and in your pocket

A fitness tracker or smartwatch reads motion and heart-rate sensors and syncs with your phone over Bluetooth. Wireless earbuds decode audio and manage their tiny batteries. Your smartphone is a general-purpose computer, but it’s packed with embedded subsystems: the cellular modem, the camera processor, the touchscreen controller and the charging circuit each run their own firmware. If you use a digital camera, it has dedicated processors to read the image sensor and save photos.

In the car

A modern car contains dozens of embedded computers, often called electronic control units (ECUs). The engine control unit manages fuel injection and ignition. ABS monitors wheel speeds when you brake. The airbag controller watches crash sensors. Power windows, climate control, the instrument cluster, parking sensors and the infotainment screen are all run by embedded systems. Your key fob is one too: it sends an encrypted code when you press the button. Electric vehicles add a battery management system that monitors every cell.

Out and about

On the way to work you might pass through traffic lights run by a signal controller, tap a card on a transit fare gate, or pay at a contactless card terminal. You might take cash from an ATM, buy a drink from a vending machine, or ride an elevator whose controller handles calls and door safety. Parking meters, self-checkout machines and digital signs are embedded systems too.

At work

Your ID badge reader checks your access card. The office printer manages its network connection, paper path and print queue. Network switches and access points keep the office connected. In a factory, programmable logic controllers (PLCs) run machines and conveyors, and robot controllers move robotic arms. In a hospital, patient monitors, infusion pumps and imaging machines all rely on embedded systems.

By the end of the day, you’ve probably interacted with dozens of embedded systems without thinking of any of them as a computer.

What makes each of these an embedded system

These devices look very different, but they share the same core features:

  • A dedicated job. The microwave cooks. It doesn’t run spreadsheets.
  • A built-in computer. Usually a microcontroller with its own memory, running firmware.
  • Inputs and outputs connected to the real world. Buttons, sensors and radios bring information in; motors, heaters, displays and relays act on it.
  • No user-installed software. You use the device, but you don’t install programs on it. The manufacturer may send firmware updates.

Many also have timing requirements. An airbag or ABS controller must respond within a strict deadline, which is why embedded systems are often described as real-time. Our guide to the types of embedded systems explains real-time, standalone, networked and mobile categories.

How to spot an embedded system

You can usually tell a device contains an embedded system if:

  1. It has buttons, a display or LEDs that respond in a “smart” way (menus, timers, programs, error codes).
  2. It reads sensors and reacts automatically, such as switching on when it gets cold or dark.
  3. It connects to an app, Wi-Fi or Bluetooth.
  4. Its manual mentions firmware or a firmware update.
  5. It isn’t sold as “a computer,” but it clearly makes decisions.

If a device is purely mechanical (a manual can opener) or uses only simple electrical parts (a basic light switch or a plain incandescent lamp), it doesn’t contain an embedded system.

For a broader, sector-by-sector view, including medical, industrial, energy and aerospace uses, see our guide to embedded system examples and applications. For newer devices such as EV chargers, smart meters and wearables, see real-life examples of embedded systems used today.

Frequently asked questions

What is the simplest example of an embedded system?

A TV remote control is one of the simplest. It contains a small microcontroller that sleeps until a button is pressed, works out which button it was, sends the matching infrared or radio code, and goes back to sleep. A digital kitchen timer or a basic digital watch is similarly simple.

Is a computer an embedded system?

A desktop or laptop computer is not an embedded system. It’s a general-purpose computer, built to run whatever software you choose. But it contains embedded systems inside it, such as the keyboard controller and the storage drive controller. Our article on embedded systems vs general-purpose computers explains the difference.

How many embedded systems are in a typical home?

It varies a lot, but a home with modern appliances, a car, phones and a few smart devices can easily contain dozens of embedded processors, and many more if you count the small controllers inside chargers, batteries and peripherals.

The complete guide to embedded basics

What Is an Embedded System? Definition, Features and Examples
Read the guide

Keep exploring

Guides from other topics

All topics →